How do I connect my Canon mg3600 printer to Wi-Fi?

If you have recently purchased a Canon PIXMA MG3600 printing machine for your home or office use, then the first thing you require to do is to unpack the box slightly and take out all the accessories and then put the device on a table. Plug-in the printer in an electric power slot and then start with the canon mg3600 setup.

Methods For PIXMA Canon MG3600 Setup

Method 1: WPS Connection of Method

If your access point has a WPS button, then without any confusion select the ‘WPS Connection Method’ as this method is the easiest way of completing canon mg3600 Wifi setup with router. Just have a glance on the noted lines and follow the same as directed:

• First of all, make sure that the printer is ON and the WPS button on the wireless router is accessible
• Now, press and hold the Wi-Fi button on the printer until the ON lamp flashes

• Press the “Black” button and then the “Wi-Fi” button
• Now, make sure the Wi-Fi lamp flashes quickly and the ON lamp is lit. Then, go to your access point and press the WPS button within a couple of minutes

• After that, you can see that the blue Wi-Fi lamp on the printer will continue flashing while searching, and the Power and Wi-Fi lamps will both flash when connecting to the access point. Once the printer gets successfully made the connection to your wireless network, the Power and Wi-Fi lamps will stop flashing and remain lit
• In the end, make sure that the Wi-Fi lamp and the ON lamp are lit

Once done the above procedure, the network connection setup is now completed. If still your device is not connected, then jump to the next method to complete the canon mg3600 setup process.

Method 2: Standard Connection Method

In case your access point doesn’t support WPS feature, then follow the below-given instructions to set your printer up on your wireless network:

• Click on “Start Setup” when the initial screen display
• Now, the software will check for the driver if there is needed to update. It will start downloading automatically if needs to be updated. Wait for a few minutes
• Select your region and country and then click “Next”
• If you accept the terms and conditions of the license agreement, then click “Yes”
• If you want to take part in the Extended Survey Program, click “Agree”, otherwise click “Do not agree”
• Click “Next” to allow all “Install Wizard Process”
• Select “Wireless LAN Connection” and then tap “Next”
• Select Connect via wireless router” and then click “Next”
• Make sure your printer is turned on and then hit “Next”
• Make sure “Setting printer could not be found on the list” is selected, and then tap “Next”
• The setup guide will open, all you need to do is to follow the on-screen instructions carefully
• Wait for a minute while the setup discovers the printer
• Once the setup is completed, hit “Next”
• And then click “Exit”

Begin with connecting all its wires by looking in the printer manual. With an automatic connection button, WPS, you can connect your devices. This allows both the devices such as printer and computer to connect with each other to your network without needing to enter a password.

Canon mg2940 Wifi Setup

Canon mg3500 Wifi Setup

The Rockspace extender setup and login process is simple. Some novice users can make mistakes and face issues. They can face problems like Re.rockspace.local not working. My WIFI signal range is weak. Or the extender is offline. Therefore, I am getting dropped internet connection again and again. Don't worry! Here we are going to discuss a simple method to set up your Rockspace Extender. You have to use only a computer and a web browser. The computer requires association with the router's network to access the Re.rockspace.local login page. Connect your range extender directly to the computer using an Ethernet cable. Follow Rockspace WIFI Extender setup process